#80 Stainless Steel Roller Chain x 10 ft and Free Connecting Links 1 connector

Description

Product Description:
#80 Stainless Steel Roller Chain x 10 ft and Free Connecting Links 1 connector
Product Description:
All of our chain products have gone through stringent process measures for Best Quality! This includes heat treatment, which ensures the optimum ware life and toughness for all component parts. Solid hardened and shot peened precision rollers are standard on most of our chains. The bushings provide a smooth roller bearing effect reducing the impact load as the chain engages the sprockets tooth. During chain assembly, all chain components are oriented to ensure pins, bushings, and side plates are correctly positioned for optimum chain strength and long life. Assembled chains are then dipped in a hot lubricant. This lubrication and the process in which it is applied greatly improve the ware life capacity of the chain and further protect it from the effects of the environment. All of our chains are factory preload. They are pretested to support and maintain the expected load the chain will see when in use. This helps align the chain parts which will minimize the initial elongation!
Specification:
#80 Roller Chain x 10 feet
ANSI Chain No.: #80
Lenght: 10 feet
Pitch (P): 1.0 inch (25.400 mm)
Roller Diameter (d1 max): 0.625 inch (15.88 mm)
Width Between Inner Plates (b1 min): 0.620 inch (15.75 mm)
Pin Diameter (d2 max): 0.311 inch (7.92 mm)
Pin Lenght (L max): 1.287 inch (32.70 mm)
Pin Lenght (Lc max): 1.377 inch (35.00 mm)
Inner Plate Depth (h2 max): 0.944 inch (24.00 mm)
Plate Thickness (T max): 0.128 inch (3.25 mm)
Ultimate Tensile Strenght (Q min): 56.70/12886 kN/LB
Average Tensile Strenght (Qo): 69.4 kN
Weight (q): 1.747 lb/ft (2.6 kg/m)
Package including:
#80 10ft chain with 1 connector.
Item Specifics
Brand
labwork
MPN
LAW175614
Chain Size
#80
Chain Length
10 ft
Pitch (P)
1.0 inch (25.400 mm)
Roller Diameter (d1 max)
0.625 inch (15.88 mm)
Width Between Inner Plates (b1 min)
0.620 inch (15.75 mm)
Pin Diameter (d2 max)
0.311 inch (7.92 mm)
Pin Lenght (L max)
1.287 inch (32.70 mm)
Pin Lenght (Lc max)
1.377 inch (35.00 mm)
Inner Plate Depth (h2 max)
0.944 inch (24.00 mm)
Average Tensile Strenght (Qo)
69.4 kN
Payment
We Accept Paypal Only.
Shipment
Usually we arrange shipping in 3 business day after payment confirmed.
Orders will be shipped out via Carrier USPS or FedEx .
Delivery time :
When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.
Warrenty & RMA
Warranty for defective items (excluding items damaged and/or misused after receipt).
In order to return an item you must contact us to request a RMA No.
Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.
Service & Contact
We hope you have a pleasant shopping experience with us and satisfy 100%.
If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
Usually, we response your email in 1 business day.
[ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
Headlight
Suspension
Window Visors
Shop Category
Store Home
Suspension & Steering
Lighting & Lamps
◈  Fog Lights
◈  Xenon Headlight Ballast
◈  Headlight
◈  Fog Lamps cover
◈  Turn Lights
◈  Brake Lights
◈  Truck Light Strip
◈  Moto Lighting & Lamps
◈  Others
◈  Tail Lights
Carburetor
◈  Lawn Mowers Carburetor
◈  String Trimmers Carburetor
◈  Blower Carburetor
◈  Snow Blower Carburetor
◈  Snowthrower Carburetor
◈  Saw Carburetor
◈  Tractor Carburetor
◈  Motorcycle Carburetor
◈  ATV Carburetor
◈  Automobile Carburetor
◈  Others
◈  Golf Carburetor
◈  Gasket
◈  Rebuild kit
◈  Intake Manifold Boot
Boat
◈  Steering Shaft Pin
◈  Yacht Light
◈  Others
Radiators
Fans & Kits
Auto Valve
◈  Pressure Relief Valve
◈  Air Idle Valve
◈  Transmission Solenoids
◈  Control Valve
◈  Transmission Solenoids Valve
◈  EGR Valve
◈  Selector Valve
◈  Others
Motorcycle Valve
◈  Motorcycle Solenoid Valve
◈  Motorcycle fuel Switch Valve
◈  Others
Fule Injector
Brakes & Brake Parts
◈  Brake Master Cylinder
◈  Clutch & Clutch Parts
◈  Motorcycle Hand Brake Handle
◈  Motorcycle Brake Cable
◈  Motorcycle Brake Pads
◈  Others
Car Repair Kit
Auto Engine System
◈  Valve Cover & Gasket
◈  Oil Cooler
◈  Engine Timing Cover
◈  Thermostat
◈  Turbine Cover
◈  Automobile Heaters&Accessories
◈  Engine Coolant Recovery Tank
◈  Hydraulic Roller
◈  Glow Plug
◈  Filter Housing &Accessories
◈  Tilt Trim Motor
◈  Engine Rocker Arm Shaft Sleeve
◈  Oil Scale
◈  Coolant Water Inlet Pipe
◈  Others
Auto Ignition System
◈  Car Ignition Coil
◈  Spark Plug Protective Cover
◈  Ignition Switch
◈  Car Ignition
◈  Car Ignition Module
Auto Hub
◈  Locking Hub
◈  Hub Bearing
◈  Others
Motorcycle Ignition System
◈  Motorcycle Ignition
◈  Motorcycle Ignition Coil
◈  Motorcycle Fuel Switch
◈  Motorcycle Hand Plate
◈  Motorcycle Ignition Switch
◈  Motorcycle Starter Fitting
◈  Motor Electromagnetic Starter
Motorcycle engine system
◈  Piston Cylinder Fittings
◈  Camshaft
◈  Others
Auto Actuator
◈  Air Conditioner Actuator
◈  Door Lock Actuator
◈  Eccentric Shaft Actuator
◈  Hood Catch
◈  AC Blower Motor
◈  Clutch Actuator
◈  Fuel Door Opener Actuator
◈  Others
Auto Motor
◈  Transmission stepper motor
◈  Transfer Case Gear Motor
◈  Blower Resistor
◈  Others
Auto Inlet & Outlet System
◈  Air Filter
◈  Intake Exhaust Valves
◈  Throttle Body
◈  Power Brake Booster
◈  Exhaust And Intake Pipes
◈  Turbocharger
◈  Others
Auto Circuit Wiring Harness
◈  Airbag Hairspring
◈  Positive Battery Cable
◈  Sensor Harness
◈  Body Wiring Harness
◈  Gear Shift Control Cable
◈  Battery Terminal
◈  Others
Transmission System
◈  Chain
◈  Shaft
◈  Gear
◈  Tensioner
◈  Belt
◈  Steering Power Hose
◈  Others
Auto Switch
◈  Door Power Window Switch
◈  Neutral Safety Switch
◈  Combination Lever Switch
◈  Parking Brake Switch
◈  Others
Motorcycle Control System
◈  Gearbox Shift Line
◈  Rectifier
◈  Relay
◈  Voltage Regulator
◈  Thumb Oiler
◈  Others
Auto Sensor
◈  TPMS Sensor
◈  Mass Air Flow Sensor
◈  Oxygen Sensor
◈  Knock (Detonation) Sensor
◈  Throttle Position Sensor (TPS)
◈  Vehicle Speed Sensor
◈  ABS Wheel Speed Sensor
◈  Fuel Pressure Sensor
◈  Crankshaft Position Sensor
◈  Oil Pressure Sensor
◈  Camshaft Position Sensor
◈  Ride Height Sensor
◈  PDC Sensor
◈  MAP Sensor
◈  Exhaust Pressure Sensor
◈  Others
Motorcycle Pump
◈  Fuel Pump
◈  Brake Calipers
◈  Others
Auto Interior
◈  Plastic Rivets Fasteners
◈  Cargo Covers
◈  Door Panels
◈  Center Overhead Consoles
◈  Cup Holder
◈  Inside Door Handle
◈  Inner Door Panel Handle
◈  Cigarette Lighter
◈  Storage Box
◈  Air Conditioner Vent
◈  Others
◈  Seat Covers
◈  Floor Mats
Exterior Trimming Parts
◈  Roof Rack
◈  Running Boards/Side Steps
◈  Bmuper Grille
◈  Fender Flares
◈  Front Bumper Grille Guard
◈  Door Handle
◈  Fuel tank cap
◈  Hinge
◈  Front Bumper
◈  Rear Bumper
◈  Motorcycle Decoration
◈  Others
◈  Windshield Wiper Blades
◈  Window Visors
◈  Auto body trim panel
◈  Front bumper trim
Auto Bump
◈  Auto Fuel Pump
◈  Auto Water Pump
◈  Power Steering Pump
◈  Others
Home & Garden
◈  Health & Beauty
◈  Sports Goods
◈  Yard, Garden & Outdoor Living
◈  Toy
◈  Sticker
◈  Others
Business & Industrial
◈  Industrial Control Module
▷  CNC
♢  Edge finder
♢  Drill Bits
♢  Spring Collet
♢  Boring Bar
♢  Mandrel
♢  Collet Chuck
♢  Pull Stud
♢  Quick Change Tool Post
♢  Drill Chuck
♢  Drill Chuck Arbors
♢  Live center
♢  Vise
♢  Milling Arbor
♢  Reamer
♢  Blocks
♢  Other
▷  Hand Tools
♢  Rivet Gun
♢  Wrenches
♢  Hydraulic Crimper
♢  Balance Level
♢  Drill Bits
♢  Outside Micrometer
♢  Casters
♢  Other
▷  Metalworking Supplies
♢  Sanding Disc
♢  Metal Cut Off Wheels
♢  Flap Discs
♢  Hose Clamp
♢  Welding Wire
♢  Piston Driver
♢  Other
▷  Generator Accessories
♢  Automatic Voltage Regulator
♢  Generator Carburetor
A/C Compressor & Clutch
◈  A/C Compressor Clutch
◈  A/C Compressor
Other
Hot Item
Carburetor for Briggs & Stratton 42E707 42E777 42A707 42A777 Carburetor
USD 30.31
NEW X-Tube Heat Shrink Wrap Tubing 39"&64"Lengths for Rod Grips 5 Color 14 Sizes
USD 7.15
NEW Plastic Plant Flower Pots Nursery Seedlings Pot Plant 100Pcs
USD 17.09
Carburetor 18.5HP For Briggs Stratton Craftsman LT1000 LT2000 DYT4000 Z225 NJ
USD 17.20
Men Safety Shoes Steel Toe Steel Sole Breathable Work Outdoor Boots Size US
USD 25.00
New List Item
Heavy Duty Caster Wheels 4" Swivel All Brake Casters Non Skid No Mark 4 Pack
USD 28.02
5PCS CAT40-ER32 COLLET CHUCK CHUCKS balanced to G2.5/25000RPM B25-CAT40-ER32-NEW
USD 106.29
New Oscillating Multi Tool Saw Blade For Multimaster BOSCH Dremel Makita 14Pcs
USD 14.57
N021229 / N038785 Piston Kit For DeWALT N021725 / 2-7/8" D55146 D55167
USD 18.94
New Oscillating Multitool 48 Pieces Universal Quick Release Saw Blades Kit
USD 34.79
#80 Stainless Steel Roller Chain x 10 ft and Free Connecting Links 1 connector
Product Description:
All of our chain products have gone through stringent process measures for Best Quality! This includes heat treatment, which ensures the optimum ware life and toughness for all component parts. Solid hardened and shot peened precision rollers are standard on most of our chains. The bushings provide a smooth roller bearing effect reducing the impact load as the chain engages the sprockets tooth. During chain assembly, all chain components are oriented to ensure pins, bushings, and side plates are correctly positioned for optimum chain strength and long life. Assembled chains are then dipped in a hot lubricant. This lubrication and the process in which it is applied greatly improve the ware life capacity of the chain and further protect it from the effects of the environment. All of our chains are factory preload. They are pretested to support and maintain the expected load the chain will see when in use. This helps align the chain parts which will minimize the initial elongation!
Specification:
#80 Roller Chain x 10 feet
ANSI Chain No.: #80
Lenght: 10 feet
Pitch (P): 1.0 inch (25.400 mm)
Roller Diameter (d1 max): 0.625 inch (15.88 mm)
Width Between Inner Plates (b1 min): 0.620 inch (15.75 mm)
Pin Diameter (d2 max): 0.311 inch (7.92 mm)
Pin Lenght (L max): 1.287 inch (32.70 mm)
Pin Lenght (Lc max): 1.377 inch (35.00 mm)
Inner Plate Depth (h2 max): 0.944 inch (24.00 mm)
Plate Thickness (T max): 0.128 inch (3.25 mm)
Ultimate Tensile Strenght (Q min): 56.70/12886 kN/LB
Average Tensile Strenght (Qo): 69.4 kN
Weight (q): 1.747 lb/ft (2.6 kg/m)
Package including:
#80 10ft chain with 1 connector.
Payment
Shipment
Warrenty & RMA
Service & Contact
We Accept Paypal Only.
Usually we arrange shipping in 3 business day after payment confirmed.
Orders will be shipped out via Carrier USPS or FedEx .
Delivery time :
When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.
Warranty for defective items (excluding items damaged and/or misused after receipt).
In order to return an item you must contact us to request a RMA No.
Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.
We hope you have a pleasant shopping experience with us and satisfy 100%.
If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
Usually, we response your email in 1 business day.
[ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
All rights reserved.