BOAT TEAK WOOD MARINE CERAMIC COATING LONG LASTING NATURAL FINISH - 3.38oz/100ml

Description

SUPERMAXX
CERAMIC WOOD SEALER
DECKS, TRIM, RAILING
Use on All Un-Finished Wood Surfaces
Recommended application is every 2-3 years.
Advanced Polysilazane Nano Ceramic
Formula
100% Satisfaction Guarantee
Made in America
Safe & Effective on all Un-Finished Wood Surfaces.
About The Product
Supermaxx
Marine Grade Wood Coating is the strongest wood sealer available and features superior quality for superior results.
Supermaxx
Wood Sealer is both a hydrophobic and oleophobic Polysilazane Ceramic polymer that densifies and cures to a ceramic-like surface.  This high-quality Ceramic clear coat sealer penetrates into wood surfaces and repels all staining materials.  This is important for your wood surfaces which provide breathability, and is
extremely
durable, long-lasting, and offers superior sealing protection.
Additionally, it cures to a diamond-hard ceramic surface that densifies the wood fibers providing a durable UV-resistant natural look with superior stain protection.
Supermaxx
Marine Grade Ceramic Coating penetrates deep into all Teakwood surfaces, providing the ultimate protection under the surface and on top.  It converts into a safe, durable, clear ceramic polymer material that
fills
the pores of the wood which keeps staining materials from entering and damaging the wood surface.  It also blocks unhealthy bacteria, germs, oils, and dirt which are not good for your surfaces, or your health.  As an added feature,
Supermaxx Ceramic
Wood Sealer helps make cleaning quicker and easier with less
maintenance
.  Moreover, it is easier to use than typical solvent or water-based wood sealers allowing virtually anyone to apply a quality application without streaking.
Use on all your UN-SEALED Wood Surfaces
The World's Best Marine Grade Teakwood Sealer
Faster, Better & Easier Cleaning
Made in America
Natural Look
Less Maintenance
Marine Grade
Better Solutions for Better Results
Product Directions:
It is highly recommended that before applying a sealer, you do a Deep Cleaning of your wood surfaces.  This gets the oils and dirt out of the pores which keeps them from being sealed in and allows the sealer to penetrate better into all the wood’s pores.
Step 1 – Deep Cleaning
It is recommended before applying a sealer that you first do a deep cleaning as detailed in the above “Deep Cleaning” sections.  After deep cleaning, we recommended that you allow the wood surfaces to dry for at least 12 hours before proceeding with applying a sealer.
Step 2 – Wipe, Brush, Pad, Spray, or Roll On.
After your wood surface is completely clean and dry, apply the sealer onto the surface. Apply enough sealer so that the entire surface area is wet.  Once entirely wet with sealer, allow drying for at least 6 hours before use.
3.38oz/100ml - SIZE AVAILABLE
8oz/237ml - SIZE AVAILABLE
16oz/473/ml - SIZE AVAILABLE
32oz/947ml - SIZE AVAILABLE