Carbon Steel #40 Roller Chain 10 FT With 2 Connecting Links

Description

Product Description:All of our chain products have gone through stringent process measures for Best Quality! This includes heat treatment, which ensures the optimum ware life and toughness for all component parts. Solid hardened and shot peened precision rollers are standard on most of our chains. The bushings provide a smooth roller bearing effect reducing the impact load as the chain engages the sprockets tooth. During chain assembly, all chain components are oriented to ensure pins, bushings, and side plates are correctly positioned for optimum chain strength and long life. Assembled chains are then dipped in a hot lubricant. This lubrication and the process in which it is applied greatly improve the ware life capacity of the chain and further protect it ...
Carbon Steel #40 Roller Chain 10 FT With 2 Connecting Links
Product Description:
All of our chain products have gone through stringent process measures for Best Quality! This includes heat treatment, which ensures the optimum ware life and toughness for all component parts. Solid hardened and shot peened precision rollers are standard on most of our chains. The bushings provide a smooth roller bearing effect reducing the impact load as the chain engages the sprockets tooth. During chain assembly, all chain components are oriented to ensure pins, bushings, and side plates are correctly positioned for optimum chain strength and long life. Assembled chains are then dipped in a hot lubricant. This lubrication and the process in which it is applied greatly improve the ware life capacity of the chain and further protect it from the effects of the environment. All of our chains are factory preload. They are pretested to support and maintain the expected load the chain will see when in use. This helps align the chain parts which will minimize the initial elongation. This will drastically increase the life of the chain.
Features:
Pitch Size (p) : 0.500 Inch
Roller Diameter (d1 max) : 0.312 Inch
Width Between Inner Plates (b1 min) : 0.309 Inch
Pin Diameter (d2 max) : 0.156 Inch
Pin Length (L max) : 0.654 Inch
Pin Length (Lc max) : 0.701 Inch
Inner Plate Depth (h2 max) : 0.472 Inch
Plate Thickness (T max) : 0.059 Inch
Average Tensile Strength: 4000 lb
Material: Carbon Steel
Length: 10 Feet
Weight Per Foot: 0.415 lbs
Item Specifics
Brand
autoooparts
MPN
APO91096
Chain Size
#40
Chain Pitch
1/2 in
Chain Length
10 ft
Payment
1.We accept PayPal only.
2.E-checks via PayPal will be hold until it is cleared.
Shipping
We ship worldwide.
USPS First Class Mail or FedEx shipping, thank you.
Standard Order Processing time:
All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.
Returns
30 DAY MONEY BACK SATISFACTION GUARANTEE
Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please contact to have the product repaired or replaced.
Contact Us
Please send all correspondence through the eBay messaging system.
Messages will be replied within 24 hours.
About us
Thank you for visiting our store. We hope you are satisfied with the item and our service.
Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.
Lighting & Lamps
Shop Category
Store Home
Suspension & Steering
Lighting & Lamps
◈  Fog Lights
◈  Xenon Headlight Ballast
◈  Headlight
◈  Fog Lamps cover
◈  Turn Lights
◈  Brake Lights
◈  Truck Light Strip
◈  Moto Lighting & Lamps
◈  Others
◈  Tail Lights
Carburetor
◈  Lawn Mowers Carburetor
◈  String Trimmers Carburetor
◈  Blower Carburetor
◈  Snow Blower Carburetor
◈  Snowthrower Carburetor
◈  Saw Carburetor
◈  Tractor Carburetor
◈  Motorcycle Carburetor
◈  ATV Carburetor
◈  Automobile Carburetor
◈  Others
◈  Golf Carburetor
◈  Gasket
◈  Intake Manifold Boot
◈  Rebuild kits
Boat
◈  Steering Shaft Pin
◈  Yacht Light
◈  Others
Auto Valve
◈  Pressure Relief Valve
◈  Air Idle Valve
◈  Transmission Solenoids
◈  Control Valve
◈  Valve Body
◈  EGR Valve
◈  Selector Valve
◈  Others
Motorcycle Valve
◈  Motorcycle Solenoid Valve
◈  Motorcycle fuel Switch Valve
◈  Others
Module
◈  Headlight Driver Module
◈  Fan Control Module
◈  Voltage Converter Module
◈  Others
Fule Injector
Brakes & Brake Parts
◈  Brake Master Cylinder
◈  Clutch & Clutch Parts
◈  Motorcycle Hand Brake Handle
◈  Motorcycle Brake Cable
◈  Motorcycle Brake Pads
◈  Others
Car Repair Kit
Auto Engine System
◈  Valve Cover & Gasket
◈  Engine Timing Cover
◈  Thermostat
◈  Turbine Cover
◈  Machine Oil Can
◈  Filter Housing &Accessories
◈  Engine Hood
◈  Oil Scale
◈  Others
Auto Ignition System
◈  Spark Plug
◈  Car Ignition Coil
◈  Spark Plug Protective Cover
◈  Ignition Switch
◈  Car Ignition
◈  Car Ignition Module
◈  Others
Auto Hub
◈  Locking Hub
◈  Hub Bearing
◈  Others
Motorcycle Ignition System
◈  Motorcycle Ignition
◈  Motorcycle Ignition Coil
◈  Motorcycle Fuel Switch
◈  Motorcycle Hand Plate
◈  Motorcycle Ignition Switch
◈  Motorcycle Starter Fitting
◈  Motor Electromagnetic Starter
Motorcycle engine system
◈  Piston Cylinder Fittings
◈  Camshaft
◈  Others
Auto Actuator
◈  Air Conditioner Actuator
◈  Door Lock Actuator
◈  Eccentric Shaft Actuator
◈  Hood Catch
◈  AC Blower Motor
◈  Clutch Actuator
◈  Fuel Door Opener Actuator
◈  Others
Auto Motor
◈  Transmission stepper motor
◈  Transfer Case Gear Motor
◈  Blower Motor
◈  Blower Resistor
◈  Others
Auto Inlet & Outlet System
◈  Air Filter
◈  Intake Exhaust Valves
◈  Throttle Body
◈  Power Brake Booster
◈  Exhaust And Intake Pipes
◈  Turbocharger
◈  Others
Auto Circuit Wiring Harness
◈  Airbag Hairspring
◈  Positive Battery Cable
◈  Sensor Harness
◈  Body Wiring Harness
◈  Gear Shift Control Cable
◈  Battery Terminal
◈  Others
Transmission System
◈  Chain
◈  Shaft
◈  Gear
◈  Tensioner
◈  Belt
◈  Others
Auto Switch
◈  Door Power Window Switch
◈  Neutral Safety Switch
◈  Combination Lever Switch
◈  Parking Brake Switch
◈  Others
Motorcycle Control System
◈  Gearbox Shift Line
◈  Rectifier
◈  Relay
◈  Voltage Regulator
◈  Thumb Oiler
◈  Others
Auto Sensor
◈  TPMS Sensor
◈  Mass Air Flow Sensor
◈  Oxygen Sensor
◈  Knock (Detonation) Sensor
◈  Air Pressure Sensor
◈  Throttle Position Sensor (TPS)
◈  Vehicle Speed Sensor
◈  ABS Wheel Speed Sensor
◈  Fuel Pressure Sensor
◈  Crankshaft Position Sensor
◈  Oil Pressure Sensor
◈  Camshaft Position Sensor
◈  Ride Height Sensor
◈  MAP Sensor
◈  Exhaust Pressure Sensor
◈  Coolant Temperature Sensor
◈  Others
Motorcycle Pump
◈  Fuel Pump
◈  Brake Calipers
◈  Others
Auto Interior
◈  Plastic Rivets Fasteners
◈  Trunk Shield
◈  Sunroof Sunshade Corn
◈  Armrest Center Box Cover
◈  Cup Holder
◈  Inside Door Handle
◈  Inner Door Panel Handle
◈  Cigarette Lighter
◈  Storage Box
◈  Air Conditioner Vent
◈  Others
◈  Floor Mats
Exterior Trimming Parts
◈  Roof Rack
◈  Running Boards/Side Steps
◈  Bmuper Grille
◈  Fender Flares
◈  Door Handle
◈  Fuel tank cap
◈  Hinge
◈  Front Bumper
◈  Rear Bumper
◈  Motorcycle Decoration
◈  Others
◈  Windshield Wiper Blades
◈  Window Visors
◈   Auto body trim panel
◈  Front bumper trim
Auto Pump
◈  Fuel Pump
◈  Water Pump
◈  Air Pump
◈  Power Steering Pump
◈  Clutch Master Cylinder
◈  Oil Pump
◈  Others
Business & Industrial
▷  Industrial Control Module
♢  Control Valves
♢  Other
▷  CNC
♢  Edge finder
♢  Drill Bits
♢  Spring Collet
♢  Boring Bar
♢  Mandrel
♢  Collet Chuck
♢  Pull Stud
♢  Quick Change Tool Post
♢  Drill Chuck
♢  Drill Chuck Arbors
♢  Live center
♢  Vise
♢  Milling Arbor
♢  Reamer
♢  Blocks
♢  Other
▷  Hand Tools
♢  Rivet Gun
♢  Wrenches
♢  Hydraulic Crimper
♢  Balance Level
♢  Drill Bits
♢  Outside Micrometer
♢  Casters
♢  Other
▷  Metalworking Supplies
♢  Sanding Disc
♢  Metal Cut Off Wheels
♢  Flap Discs
♢  Hose Clamp
♢  Welding Wire
♢  Cable
♢  Piston Driver
♢  Other
▷  Generator Accessories
♢  Automatic Voltage Regulator
♢  Generator Carburetor
♢  Other
Home & Garden
◈  Yard, Garden & Outdoor Living
◈  Toy
◈  Others
Radiators & Parts
Golf Cart Parts & Accessories
◈   Golf car charger
Other
Hot Item
For Router Fan Variable Speed Controller Electric Motor Rheostat AC 120V New
USD 19.95
Carburetor Fits for KOHLER CV12.5 CV13S CV13T CV14 CV14S CV15S Carb
USD 15.82
Carb For Toro 6.5 6.75 7.0 7.25 HP Recycle Mower 190cc 22"
USD 12.67
Carburetor For Kohler CV730 S CV740 S 25HP 27 HP Engine 24853102-S Tractor Carb
USD 34.38
Weed Eater Cap For Worx Replacement Spool Line String Trimmer 12 Pack WA0010
USD 13.61
Excellent Delivery
New List Item
E6011 1/8" Premium Arc Welding Rods Carbon Steel Electrode 10 lb With Box
USD 30.39
2" 25 Pcs 36 Grit Zirconia + Grind Aid Quick Change Sanding Discs Type Roloc US
USD 14.75
50× 2 inch Fine Surface Conditioning Discs Roll Lock Die Grinder Sanding Pads US
USD 24.25
Brand new Drift Trike Go Kart Rear Live Axle Kit, Sprocket & Hub Axle 740mm
USD 88.45
71PCS 2" Roll Lock Sanding Discs Set W/ 1/4 Holder Die Grinder Quick Change Disc
USD 22.85
Carbon Steel #40 Roller Chain 10 FT With 2 Connecting Links
Product Description:
All of our chain products have gone through stringent process measures for Best Quality! This includes heat treatment, which ensures the optimum ware life and toughness for all component parts. Solid hardened and shot peened precision rollers are standard on most of our chains. The bushings provide a smooth roller bearing effect reducing the impact load as the chain engages the sprockets tooth. During chain assembly, all chain components are oriented to ensure pins, bushings, and side plates are correctly positioned for optimum chain strength and long life. Assembled chains are then dipped in a hot lubricant. This lubrication and the process in which it is applied greatly improve the ware life capacity of the chain and further protect it from the effects of the environment. All of our chains are factory preload. They are pretested to support and maintain the expected load the chain will see when in use. This helps align the chain parts which will minimize the initial elongation. This will drastically increase the life of the chain.
Features:
Pitch Size (p) : 0.500 Inch
Roller Diameter (d1 max) : 0.312 Inch
Width Between Inner Plates (b1 min) : 0.309 Inch
Pin Diameter (d2 max) : 0.156 Inch
Pin Length (L max) : 0.654 Inch
Pin Length (Lc max) : 0.701 Inch
Inner Plate Depth (h2 max) : 0.472 Inch
Plate Thickness (T max) : 0.059 Inch
Average Tensile Strength: 4000 lb
Material: Carbon Steel
Length: 10 Feet
Weight Per Foot: 0.415 lbs
Payment
Shipping
Returns
Contact Us
About us
1.We accept PayPal only.
2.E-checks via PayPal will be hold until it is cleared.
We ship worldwide.
USPS First Class Mail or FedEx shipping, thank you.
Standard Order Processing time:
All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.
30 DAY MONEY BACK SATISFACTION GUARANTEE
Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please contact to have the product repaired or replaced.
Please send all correspondence through the eBay messaging system.
Messages will be replied within 24 hours.
Thank you for visiting our store. We hope you are satisfied with the item and our service.
Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.
All rights reserved.