DC Multifunction Battery Monitor Meter Widely Applied LCD Display Voltmeter 100A

Description

DC Multifunction Battery Monitor Meter Widely Applied LCD Display Voltmeter 100A
Product Description
Multifunction Battery
The PZEM-015 DC multifunction battery is mainly used to test all kinds of battery’s voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, dump energy, energy consumption and running time, and display the measurement data through LCD screen.
Specification
Power consumption
Normal working state: 0.03-1.2 W
Sleeping state: 0.5mW-0.5W
Working temperature-20’C ~ +60’C.
Display interface is large-screen LCD, it can display eight parameters at the same time.
Power: Measuring range: 0-20000W, Starting measure power: 0.2W
Impedance: Measuring range: 0-1000Ω
Voltage: Measuring range: 0-200V. (when the test voltage is ＜8V, please use the independent power supply mode)
Current: Measuring range: 0-100A. The starting test current: 20mA
Internal resistance:Measuring range: 0-999mΩ
Capacity: Measuring range: 0-1000AH
dump energy：Dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy.
accumulate energy consumption:1 Measuring range: 0～9999kWh. Note: 1Wh=0.001kWh=0.001 Kilowatt
Running time:Measuring range: 0 ~ 999 hour (without load the time will not accumulate)
No screws design
Push-on terminal, no need screws to connect.
Wildly application
DC multifunction battery meter wildly used for solar system/ industrial assembly line / Auromobile Etc.
LCD Display
Large-screen
LCD with all sight 180° view
The blue backlight can be turened on/off manually
Note: The shunt must be installed on the negative side of the main circuit