INKBIRD Temperature Controller Hydroponics Propagation 308+ Humidity Thermostat

Description

ITC-308 + IHC-200: EU plug Temperature controller + Humidity controller
ITC-308:  Digital Dual Stage Temperature Controller Outlet Thermostats With 6.56ft NTC Stainless
Probe Sensor for Aquarium, Incubator ect
Main features:
-
EU Plug & Socket
- Plug and play design,
easy to use
;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with
Centigrade or Fahrenheit unit
;
- Maximum output load:
1100W(110V)/2200W(220V)
;
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Compressor delay protection for refrigeration control
- High and low temperature
alarms
are available;
- Over-temperature and sensor fault alarm
- Temperature calibration;
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification:
- Temperature Control Range :
-50~99 °C / -50~210 ° F
Temperature Set Value         -50～210°F/-50~99.9°C
Heating Differential Value     0.3～15℃/1～30℉
Cooling Differential Value     0.3～15℃/1～30℉
- Temperature Resolution: 0.1 ° C / 0.1° F Temperature
- Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
- Temperature Control Mode :
On/Off Control, Heating and Cooling
- Input Power:
100 ~240VAC, 50Hz/60Hz
- Temperature Control Output: Max. 10A, 100V ~240V AC
- Buzzer Alarm: High and Low Temperature Alarm
- Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
- Socket: 85x42x24mm(3.3x1.7x1inch)
-
Sensor Type: NTC sensor (Including)
- Sensor Length:
2m / 6.56ft
- Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
- Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
- Humidity 20~85% (No Condensate)
-
Warranty: 1 Year
IHC-200 :
Programmable Digital Humidity controller for Incubator , Plant germination , Greenhouse ect.
Main features:
-
Control humidity
by setting value and differential value;
- Delay protection for Control output; Query current temperature;
- Switch the modes between humidification and dehumidification automatically;
- Calibrate the humidity value;
- Alarm when sensor error or humidity exceeds limit;
- Alarm when humidity exceeds high/low humidity setting value;
Feature:
- Power Input:
100 ~240VAC, 50Hz/60Hz
- Power Output:
Max. 10A, 100V ~240V AC
- Humidity Measuring Range : 5%-99.99%RH
- Humidity Control Range : 5%-99%RH
- Resolution: 1%RH
- Accuracy: ±3%RH
- Sensor model: AM-2301
- Sensor stability: <0.5%RH/yr
- Sensor Length：
2m / 6.56ft
- Relay Contact Capacity：
- Humidification (12A, 100-240VAC)
- Dehumidification (12A, 100-240VAC)
- Input Power Cable Length: 1.5m (5ft)
- Output Power Cable Length: 30cm (1ft)
- Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
- Socket: 85x42x24mm(3.3x1.7x1inch)
- Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
- Storage: Temperature -30~ 75 ° C / -22~ 167 ° F
- Humidity 20~85% (No Condensate)
-
Warranty: 1 Year
Package included:
1 x ITC 308S Temperature Controller EU plug;
1 x 6.56ft female to male NTC Sensor
1 x ITC-308 User manual
1 x IHC-200 humidity controller
1 x IHC-200 User manual