Mavrik Aquaflow Insecticide Miticide 32oz Controls Whiteflies Mites Thrip Aphids

Description

Not For Sale To: CT, NY
(due to regulations)
Mavrik Aquaflow Insecticide Miticide - 32 oz.
Mavrik Aquaflow Insecticide/Miticide is a fast-acting formula that provides quick knockdown and long-lasting control of insects on indoor and outdoor plants. Its active ingredient effectively kills a broad spectrum of insects through both ingestion and contact. It is non-phytotoxic so it is safe to use on all plants, including open blooms.
This flowable formulation also has flexible use rates to allow professional growers economical and more versatile applications in fighting insect infestations. Helps control aphids, mites, thrips, whiteflies, mealybugs, ticks, fleas, ants, crickets, armyworms, cutworms, adelgids, mosquitoes, earwigs, psyllids, stink bugs, and more.
Recommended for use on indoor and outdoor plants in greenhouses, interior plantscapes, flower and foliage cuttings, ornamental plantings, trees and shrubs, and containerized nursery stock, as well as for perimeter treatments around buildings and outside surfaces.
Active Ingredient
-    Tau-fluvalinate 22.3%
Target pests
-    Aphids, Thrips, Mites, Clover Mites, Two-Spotted Spider Mites, Whiteflies, Mealybugs, Ticks, Brown Dog Ticks, Lone Star Ticks, Deer Ticks, Fleas, Ants, Fire Ants, Crickets, Armyworms, Cutworms, Adelgids, Mosquitoes, Earwigs, Psyllids, etc.
For use
-    Indoor plants in greenhouses, interior plantscapes, flower and foliage cuttings. Outdoor plants in ornamental plantings, plantscapes, and containerized nursery stock. Also for perimeter treatment around buildings and outside surfaces.
Application
-   Mix 4-10 oz. of product 100 gallons of water. Apply to perimeters and outside surfaces using low pressure, coarse fan spray. Apply the spray mixture at a volume equivalent to 5 gallons per 1000 sq. ft.
DIRECTIONS FOR USE:
Do not apply this through any type of irrigation system. Not for broadcast use in nurseries. Not for use on sod farms, on grass grown for seed, or on golf course turf. Do not apply this by aerial application.
Do not apply to impervious horizontal surfaces such as sidewalks, driveways, and patios except as a spot or crack and crevice treatment. During application, do not allow pesticide to enter or runoff into storm drains, drainage ditches, gutters or surface waters.
All outdoor applications, if permitted elsewhere on this label, must be limited to spot or crack-and-crevice treatments only, except for the following permitted uses, if allowed elsewhere on this label:
Applications to soil or vegetation, as listed on this label, around structures;
Applications to lawns, turf, and other vegetation, as listed on this label;
Applications to the side of a building, up to a maximum height of 3 feet above grade;
Applications to the underside of eaves, soffits, doors, or windows permanently protected from rainfall by a covering, overhang, awning, or other structure;
Applications around potential pest entry point into buildings, when limited to a surface band not to exceed one inch in width;
Applications made through the use of a coarse, low-pressure spray to only those portions of surfaces that are directly above bare soil, lawn, turf, mulch or other vegetation, as listed on this label, and not over an impervious surface, drainage or other condition that could result in runoff into storm drains, drainage ditches, gutters, or surface waters, in order to control occasional invaders or aggregating pests.
APPLICATION DIRECTIONS:
MAVRIK AQUAFLOW Insecticide Miticide (MAVRIK AQUAFLOW) controls insects and controls or suppresses mite pests when used at labeled rates. MAVRIK AQUAFLOW works primarily through contact action, good spray coverage is necessary. Treat when pests are immature or at a susceptible stage and populations are manageable, before plant damage occurs. Repeat applications as needed, according to the specific use directions given in this label. Residues of MAVRIK AQUAFLOW can continue to control certain insect pests for a week or longer. Growth dilution, climatic variables, and pest habits determine retreatment needs.
Dilute MAVRIK AQUAFLOW in sufficient water to give thorough spray coverage based on previous experience. For best results under varying conditions, a range of use rates is recommended for most uses. Select the higher rates when pest pressure or damage potential is severe. The lower rates often give acceptable economic results. Buffer spray water to pH 5-7, if necessary.
For severe mite infestations, use the highest rate of MAVRIK AQUAFLOW and use an acaricide in an alternate treatment program. The use of a spreadersticker, insecticidal soaps, or piperonyl butoxide may improve control of mites and some insects, such as, whiteflies, aphids, thrips, and mealybugs. MAVRIK AQUAFLOW may be used as a tank-mix. The more stringent product label will apply when tank-mixing two products. When MAVRIK AQUAFLOW is tank-mixed with wettable powders, add powders to the tank first using good agitation. Check for physical and biological compatibility prior to use.
Dried residues of MAVRIK AQUAFLOW are non-toxic and non-repellent to honey bees. Treat during nonforaging periods to minimize adverse effects.
Consult your local extension office, pest management consultant, or a Wellmark International specialist for guidance in selecting a rate and timing schedule or tank mix combination that has demonstrated good performance under specific conditions. Follow all use directions and precautions for products used in tank mix.
FOR OUTDOOR APPLICATIONS:
Use lower rates and greater retreatment intervals for light to moderate insect pressures. Use higher rates and shorter retreatment intervals for green peach aphids, unexposed insects and heavy pressures of other insects. Directly spray at the rate of 0.1 fl oz/gallon to kill lone star ticks and deer ticks and bark scorpions. Mite suppression can be obtained using the lower rate; for more residual control of mites, use up to 10 fl oz/100 gal water. For maximum mite control, tank-mix with an acaricide.
Perimeter Treatments to include Outside Surface:
Aphids, Thrips, Mites, Clover Mites, Two-Spotted Spider Mites, Whiteflies, Mealybugs, Leaf-Feeding Caterpillars (i.e., Tent, Orlando, Gypsy Moth, Bagworm, Canker Worm, etc.), Ticks, Brown Dog Ticks, American Dog Ticks, Lone Star Ticks, Deer Ticks, Fleas, Ants, Fire Ants, Crickets, Armyworms, Cutworms, Springtails (Collembola), Adelgids, Mosquitoes, Chiggers*, Earwigs, Lygus Plant Bugs, Beetles (Flea, Cucumber, Elm Leaf), Leafhoppers, Weevils* (Strawberry Root, Obscure Root, Blackvine Root), Psyllids, Millipedes*, American Cockroaches, Smoky Brown Cockroaches, Oriental Cockroaches, Boxelder Bugs, Spiders, Silverfish, Firebrats, Chinch Bugs, Asian Lady Beetles*, Sowbugs, Glassy-Wing Sharpshooters, Stink Bugs, Bark Scorpions
* Except in California.
Rate: 4 -10 fl oz. per 0100 gal. or 0.2 - 0.5 fl. oz. per 5 gal. (1.3-3 teaspoons)
Specific Directions:
Apply MAVRIK AQUAFLOW to perimeters and outside surfaces of residential, non-commercial, and commercial buildings such as industrial offices, institutional buildings, private homes, duplexes, townhouses, condominiums, house trailers, apartment complexes, carports, garages, storage sheds, patios.
Apply MAVRIK AQUAFLOW using a low pressure, coarse fan spray applied in even bands to surfaces and perimeters where pests are a problem. Apply the spray mixture at a volume equivalent to 5 gallons per 1,000 square feet. Depending on the severity of pest infestations, retreatment may be necessary at 7-14 days. Apply no more than 4 times per month or no more than 20 times per year. Typical retreatment interval is 28 days.
Perimeter applications are made to a band of soil and/or vegetation 6 to 10 feet wide around and adjacent to the structure. Higher volumes of water may be needed if mulch or leaf litter is present or foliage is dense. These sites may include refuse dumps, vegetation areas, soil, trunks of woody ornamentals, and fence lines adjacent to or around the structure, and other areas near a structure where pests congregate or have been seen.
Surface applications can be made to all outside surfaces of structures listed above and include porches, window and door frames, eaves, and foundations. Apply as a crack-and-crevice treatment using a pin stream nozzle to pest harborage sites. Refrain from applying to the point of runoff.
Containerized Nursery StockOutdoors:
Aphids, Thrips, Mites, Clover Mites, Whiteflies, Leaf-Feeding Caterpillars (i.e., Tent, Orlando, Gypsy Moth, Bagworm, Canker Worm, etc.), Lygus Plant Bugs, Beetles (Flea, Cucumber, Elm Leaf), Leafhoppers, Earwigs, Ants, Crickets, Armyworms, Cutworms, Sowbugs, Chiggers*, Millipedes*, Springtails (Collembola), Adelgids, Mosquitoes, Glassy-Wing Sharpshooters, Stink Bugs, Bark Scorpions
* Except in California.
Rate: 4-10 fl oz. per 0100 gal. or 0.2 - 0.5 fl. oz. per 5 gal. (1.3-3 teaspoons)
Specific Directions:
For application to small, immature ornamental plants in containers up to 5 gallons in size: Mix 4-10 fl oz of MAVRIK AQUAFLOW in 100 gallons of water. Apply an equivalent of 100 gallons of spray solution per 20,000 square feet of growing area using a low pressure, coarse fan spray application. Spray interval is typically 14-28 days but not more than four applications per month. Do not exceed 16 applications per year. Use sufficient water to thoroughly cover the surfaces to be treated. Use lower rates for light to moderate insect pressure.
Apply spray to foliage, around base of plant, and to the main trunk or stems.
Woody and Herbaceous Ornamentals-Outdoors:
Aphids, Thrips, Mites, Clover Mites, Whiteflies, Leaf-Feeding Caterpillars (i.e., Tent, Orlando, Gypsy Moth, Bagworm, Canker Worm, etc.), Lygus Plant Bugs, Beetles (Flea, Cucumber, Elm Leaf), Leafhoppers, Earwigs, Ants, Crickets, Armyworms, Cutworms, Sowbugs, Chiggers*, Millipedes*, Springtails (Collembola), Adelgids, Mosquitoes, Glassy-Wing Sharpshooters, Stink Bugs, Bark Scorpions, Strawberry Root Weevils*, Obscure Root Weevils*, Blackvine Root Weevils*
* Except in California.
Rate: 4-10 fl oz. per 0100 gal. or 0.2 - 0.5 fl. oz. per 5 gal. (1.3-3 teaspoons)
Specific Directions:
Make applications to large, mature ornamental specimen plants or plants in containers larger than 5 gallons in size. Mix 4-10 fl oz of MAVRIK AQUAFLOW in 100 gallons of water (equivalent to 0.2-0.5 fl oz or 1.3-3 teaspoons per 5 gallons of water). Apply 100 gallons of spray solution per equivalent of 20,000 square feet of growing area using a low pressure, coarse fan spray application. Spray interval is typically 14-28 days but not more than four applications per month. Do not exceed 24 applications per year. Use sufficient water to thoroughly cover the surfaces to be treated. Use lower rates for light to moderate insect pressure. Spray on ground around base of tree or shrub and/or up main trunk or stem and foliage.
Eugenia and Pepper Tree:
Psyllids
Rate: 5-10 fl. oz. or 0.25-0.5 fl. oz. (1.5-3 teaspoons)
Specific Directions:
Apply 5-10 fl oz of MAVRIK AQUAFLOW per 100 gallons of water to protect new foliage, depending on pest pressure. Use the higher rate of MAVRIK AQUAFLOW for heavier infestations of psyllids. Apply 2 applications at 14-day intervals under heavy reinfestation pressure or if new foliage is present. If pruning is needed, prune the entire hedge, then delay application until adults and new shoots are present.
Ant Mound Treatment:
Fire Ants and other mounding ant pests.
Rate: 10 fl. oz. or 0.5 fl. oz. (3 teaspoons)
Specific Directions:
Individual ant mound treatment: Apply as drench using 1 gallon of spray solution per mound to control mounding ant colonies, including the fire ant. Thoroughly mix 2/3 teaspoons (0.1 fl oz.) of MAVRIK AQUAFLOW with 1 gallon of water. Drench the mound using 1 gallon of dilution per mound. Apply the dilution starting on the perimeter of the mound and ending at the center of the mound until the entire mound is wet but not to the point of runoff.
INDOOR APPLICATIONS:
Greenhouse Applications:
Aphids, Thrips, Mites, Whiteflies, Earwigs, Beetles (Flea, Cucumber, Elm Leaf), Leafhoppers, Springtails (Collembola), Adelgids, LeafFeeding Caterpillars (i.e., Tent, Orlando, Gypsy Moth, Bagworm, Canker Worm, etc.), Lygus Plant Bugs, Stink Bugs, Bark Scorpions
Rate: 4-10 fl. oz. 0.2-0.5 fl oz (1.3-3 teaspoons)
Specific Directions:
Broadcast, fogger, or bench applications. Mix 4-10 fl oz of MAVRIK AQUAFLOW in 100 gallons of water (equivalent to 0.2-0.5 fl oz per 5 gallons of water). Use a higher rate of MAVRIK AQUAFLOW for more residual activity. Apply 100 gallons of spray solution which will typically cover 20,000 square feet of greenhouse space using low pressure, coarse fan spray for bench or broadcast applications. Spray interval is typically 14-28 days but not more than four applications per month or 16 applications per crop. When using ElectroStatic Spraying Systems (ESS), PulsFog, cold foggers, or other ULV delivery systems, apply the labeled amount of MAVRIK AQUAFLOW over the square footage with the equipment manufacturer’s requirement of water. Follow the manufacturer’s calibration procedures.
Indoor Ornamentals (Interior Plantscapes):
Aphids, Whiteflies, Thrips, Mites, Earwigs, Beetles (Flea, Cucumber, Elm Leaf), Leafhoppers, Springtails (Collembola), Adelgids, Leaf-Feeding Caterpillars (i.e., Tent, Orlando, Gypsy Moth, Bagworm, Canker Worm, etc.), Lygus Plant Bugs, Stink Bugs, Bark Scorpions
Rate: 4-10 fl. oz. 0.2-0.5 fl oz (1.3-3 teaspoons)
Specific Directions:
Mix 0.1-0.25 fl oz of MAVRIK AQUAFLOW in 2.5 gallons of water (equivalent to 0.2-0.5 fl oz per 5 gallons of water). Apply 5 gallons of spray solution per 1,000 square feet using low pressure, coarse fan spray for plantscape applications.
Flower and Foliage Cuttings (for Dipping):
Mealybugs, Aphids, Two-Spotted Spider Mites
Rate: 5 fl oz 0.25 fl oz (1.5 teaspoons)
Specific Directions:
Immerse basket of cuttings into a diluted solution of MAVRIK AQUAFLOW until thoroughly wet (usually one minute or less).
ENVIRONMENTAL HAZARDS:
This is toxic to fish and aquatic organisms. To protect the environment, do not allow pesticide to enter or runoff into storm drains, drainage ditches, gutters or surface waters. Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area. Rinsing application equipment over the treated area will help avoid runoff to water bodies or drainage systems. Use with care when applying in areas adjacent to any body of water. Drift and runoff from treated areas may be hazardous to fish and aquatic organisms in adjacent aquatic sites. Do not apply when weather conditions favor drift from the target area.
This is toxic to honey bees if bees are exposed to direct application. However, dried residues of this product are non-toxic to honey bees. Treat during non-foraging periods to minimize adverse effects
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
No oral advice or written information given by American Pest supplies shall create a warranty.
American Pest Supplies is a seller of various products. American Pest Supplies does not warranty the safety or the effectiveness of any of the products listed on this website. Any warranty or guarantee of safety or purpose for any particular use lies solely with the manufacturer.
Pest Control Products always have a label attached and it is here by noted that for all purposes the label is the law and according to federal law the product label must be followed and that any pesticide product must be used according to the label directions.
Any advice or recommendations given by American Pest supplies or anyone representing American Pest Supplies will never be intended to take the place of the pesticide label.The pesticide label is the law and a legal document.  Always read and follow the label directions before using any pesticide product.
Some of the products sold by American Pest Supplies could require special licensing training or registration of the user in that users State, County, City, Etc. It is the sole responsibility of the purchaser and/or the end user to provide a license, permit, registration etc. If required by that purchasers local or state authorities.It is the sole responsibility of the user to verify that any products purchased are licensed for use in their State, County or City.
The customer assumes all responsibility for safe, proper and legal use of any products they purchase. The products we sell are intended for personal use only, in accordance with the customer's state laws and restrictions.
window.NREUM||(NREUM={});NREUM.info={"beacon":"bam-cell.nr-data.net","licenseKey":"32933b6325","applicationID":"66754545","transactionName":"ZgEAMkVZXEVZUEFdXV9LNxReF1ZTS1BHXUJFDQ0IGUhaRg==","queueTime":0,"applicationTime":208,"atts":"SkYDRA1DT0s=","errorBeacon":"bam-cell.nr-data.net","agent":""}