-40%
Nisus Bora-Care Termiticide Fungicide 1-Gallon
$ 50.99
- Description
- Size Guide
Description
Bora-Care is a borate-based product that provides prevention and control of Termites, Carpenter Ants, Powderpost Beetles, and Decay Fungi. Bora-Care can be used on all cellulosic materials including wood, plywood, particleboard, paper, oriented strand board (OSB), cardboard, and wood composite structural components.Bora-Care cannot be applied to any live trees or plants
.
Active Ingredient:
Disodium Octaborate Tetrahydrate (Borate) 40%
Target pests:
Wood Destroying Fungus, Termite Control and wood-destroying insects such as termites, carpenter ants, powderpost beetles, etc.
Application:
For powder post beetles, Bora-Care must be used on untreated wood. It is preferred over other treatments such as timbor in treating furniture because Bora-Care dries clear and will leave the furniture in its natural state. It will also absorb much further into the wood so you know the infestation is treated. Bora-Care is diluted with water at a 1:1 - 1:5 ratio depending on the pest you are targeting.
Yield:
One gallon of Bora-Care will treat approximately 100 lineal feet of 2 x 4 stud wall. This includes the sill plate and header. For other dimensional lumber, logs, or siding and plywood, please see the product label to the left. Typically, one gallon of concentrate Bora-Care will treat 800 square feet of a 2x4 stud wall, and 500 square feet of a crawl space or attic.
NOT FOR SALE TO:
NY
Coverage Area:
Post-construction and active infestations use rate is 1:1
The preventative use rate is 1:1, 2:1, 3:1, or 5:1 Refer to the label for complete instructions.
Shipping Weight:
12.10 lbs
Manufactured By:
Nisus
UPC:
616609111025
How Bora-Care Works
Bora-Care contains an inorganic borate salt, soluble in water, with insecticidal and fungicidal properties effective against wood-destroying organisms. A patented carrier system allows Bora-Care’s active ingredient to diffuse into wood. This system makes Bora-Care more effective than products designed to treat only the wood’s surface. It is particularly suited for seasoned or kiln-dried wood.
Bora-Care provides double protection by acting as both a toxicant via ingestion and a deterrent to termite tubing. This means that termites are kept out of structures, preventing wood damage. When termites or other wood-destroying insects ingest Bora-Care, the borate active ingredient poisons the microorganisms in the insects’ digestive tracks that are needed to break down the cellulose in the wood. Essentially, it causes insects to starve to death. Insects have shown no ability to develop resistance to borates.
Bora-Care Target Pests
Wood destroying fungus, termites, carpenter ants, wood-destroying beetles such as powder post beetles
Pests Controlled With Bora-Care
:
Subterranean Termites (Reticulitermes, Heterotermes), Formosan Termites (Coptotermes), Drywood Termites (Kalotermes, Incisitermes), Dampwood Termites (Zootermopsis, Neotermes), Powderpost Beetles (Lyctidae, Bostrichidae), Anobiid Beetles (Anobiidae), Old House Borers, Longhorn Beetles (Cerambycidae, Hylotrupes), Ambrosia Beetles (Platypodidae, Scolytidae), Carpenter Ants (Camponotus), Decay Fungi (Rot), Brown Rot (including dry rot), White Rot, Wood Decay, Algae
Target Uses of Bora Care
Bora-Care provides prevention and control of Termites, Carpenter Ants, Powderpost Beetles, and Decay Fungi. Bora-Care can be used on all cellulosic materials including wood, plywood, particleboard, paper, oriented strand board (OSB), cardboard, and wood composite structural components. Since Bora-Care is applied directly to the wood, it can be used in areas where environmental contamination is of concern. The active ingredient in Bora-Care is an inorganic salt and once in place will not decompose or volatilize out of the wood. Treatment is long-lasting as long as the treated material is not exposed to rain, continuous water or ground contact.
Bora-Care is most frequently used for pre-construction or post-construction preventative treatment of listed wood-infesting pests on structures. Bora-Care can also be used for remedial treatment of active infestations, such as in attics for the treatment of drywood termites. Bora-Care can also be used to treat wooden items like interior trims or furniture, provided there is no stain, paint, or similar finish on the items. In addition to cellulosic materials, Bora-Care also can be used on concrete to prevent termite tubing.
ACTIVE INGREDIENT:
Disodium Octaborate Tetrahydrate (Borate)
40%
Bora-Care Application Instructions
Bora-Care can be sprayed, brushed or foamed onto bare wood surfaces and voids. The product cannot be fogged. Wood treated with Bora-Care will appear darker than normal for a few days until the chemical dries in. Bora-Care will not affect the paint or staining of the wood. Wood treated with Bora-Care is non-toxic to humans and animals.
Bora-Care must be diluted with hot water in a bucket and then added to your sprayer. Failure to pre-mix in a bucket will cause your sprayer to clog.
Mixing –
The use of an impeller-type mixer that can be used with an electric drill aids the dilution process. Always mix in a separate container then add the solution to a spray tank. Use 1:1, 2:1, and 3:1 solutions within 24 hours after mixing. 5:1 solutions will remain stable for up to 30 days. Do not leave unused solution under pressure or in tank overnight.
*Always read the product label completely before use.
YIELD:
The yield of Bora-Care varies greatly depending on use and total volume of wood to be treated (not just surface area). Typically, one gallon of concentrate at a 1:1 ratio will treat 800 square feet of a 2x4 stud wall or 500 square feet of a crawl space or attic. On non-cellulosic materials, one gallon of finished solution treats 400 square feet of surface area.
For siding and paneling, one gallon of concentrate at a 1:1 ratio will treat 800 square feet of 1” wood by spraying only one side. If siding or paneling is ½” thick, the same amount of solution treats 1,600 square feet.
*See product label and supplements for charts and worksheets to aid in calculating the amount of Bora-Care needed for your application.
Standard Application Dilution rates / Mixing Ratios for Bora-Care:
*1:1 parts water to Bora-Care – 23% - active infestations, post-construction applications; application to wood more than 4 inches thick for wood-infesting beetles or Fungi or Algae
*2:1 parts water to Bora-Care – 16% - foaming or misting application for termites or carpenter ants; hardwood floors for some wood-infesting beetles
*3:1 parts water to Bora-Care – 13% - remedial control of Fungi and Algae on wood less than 4 inches thick
*5:1 parts water to Bora-Care – 9% - most preventative or pre-construction treatments
Bora-Care is for use in the following areas:
Homes, Apartments, Garages, Museums, Public and Private Institutions, Schools, Hotels, Hospitals, Kennels, Stables, Farm Buildings, Trucks, Trailers, Warehouses, Non-Food Areas of Supermarkets, Restaurants and Food Processing Plants
Surfaces:
All non-food contact surface cellulosic materials including wood, plywood, particleboard, paper, oriented strand board (OSB), cardboard (non-food packaging material), wood composite structural components, concrete, block, brick, metals, PVC plumbing pipes and other non-cellulosic materials found in structures.
Indoors
Use Bora-Care on new construction. For termite pretreatments, simply spray a two-foot-tall continuous barrier directly to the wood using a tank sprayer or portable backpack sprayer. This includes the walls, piers, interior slab or basement walls, plumbing penetrations, pipe chases, bath traps, and any other foundation penetrations. Treating this way ensures that all termite entry-points are treated. You can also use Bora-Care as a whole-house treatment for general pest protection to prevent infestations of decay fungi and wood-destroying pests such as dry wood termites and destroying beetles.
Remedial Wood Structure Treatment – Spray and/or inject Bora-Care solution into beetle holes, termite and carpenter ant galleries, and decay pockets. Apply 1 coat of solution to the point of surface saturation to all infested and susceptible wood, paying particular attention to infested areas. Apply 2 coats to those wood members with only one or two exposed sides. Wait at least 20 minutes between applications.
Wood Flooring (Remedial Treatment) – Treat by spray, brush or roller application. Prior to application, remove any existing finish by complete coarse sanding or stripping. Use a 2:1 (water to Bora-Care) solution at a rate of approximately one gallon of solution per 500 square feet of floor surface. Two coats may be required for termite infestations, waiting at least 1 hour between applications. Moisture content must be 10% or less before applying the final finish.
*Bora-Care may be applied by misting or foaming at high expansion rates into inaccessible wall voids, wall studs, and wood members. (Bora-Care cannot be used in fogging machines.) See the product label for complete details.
Preventative treatment
– For framed wood surfaces above ground, apply a 1:1 solution. Treat remainder of structural wood in a 5:1 solution. Concentrate application in areas susceptible to attack, to include all sills, plates, floor joists, piers, girders and subfloors. Treat all exterior wood including siding, facias, soffits, eaves, roofing, porches, decks and railing. If Bora-Care is the sole preventative treatment for subterranean termites, a 1:1 solution must be used.
Buildings on crawl spaces and basements (preventative and pretreatment) – Use a 1:1 solution and apply in a 2 foot uninterrupted band to all structural wood surfaces in crawl spaces and basements. To prevent termite shelter tubes on crawlspace walls, apply to concrete or block walls in a 2 foot band up from the ground on interior wall surfaces. Apply at the rate of one gallon to 400 square feet of surface area.
Please read the label for more instructions.
Outdoors
*Do not use to directly treat the soil.
All exterior wood - DO NOT APPLY IN RAIN OR SNOW. Do not expose treated exterior wood surfaces to rain or snow for at least 48 hours after treatment. For longer performance, exterior wood surfaces will require a top coating with a water-resistant finish such as paint or exterior stain. Apply within 6 weeks of treatment. Bora-Care must dry completely (at least 48 hours) before applying any protective topcoat.
Treatment of exterior wood surfaces less than 2 inches thick, such as decks, sheds, and fences – Apply only to bare wood or to wood surfaces where an intact water repellent or finish is not present. Remove paint or finish prior to application. Apply one coat of solution to all wood surfaces. Apply two coats to heavily infested areas and to those surfaces where access is limited to 1 or 2 sides of wood members.
Exterior wood thicker than 2 inches, Logs, timbers, beams, etc. – Use a 1:1 Bora-Care solution to all surfaces. Treat bare wood only. Refer to application charts for specific sizes of logs or beams. Typically, 2 coats are required to treat round logs 10” or greater in diameter and rectangular logs larger than 6” x 12”. Wait at least 1 hour between applications.
When treating around the exterior of structures, cover and protect shrubbery and plants that may be potentially exposed to Bora-Care, since it may be phytotoxic to plants.
Bora-Care Features
*Pretreatments can be done IN ONE TRIP. No need to worry about weather delays or pumping chemicals into the soil, crews can remain on the job site during treatment, and treatment will last for many years.
*Absorbs all the way into the wood for the most complete borate treatment available.
*Dries clear, doesn’t affect future painting or staining of wood surfaces.
*Emits no VOCs (volatile organic compounds).
*Qualifies builders for LEED for Homes points as well as points in many other green building programs.
*Bora-Care is the only borate-based termiticide that is EPA-registered as a primary perimeter termite pretreatment for new construction with its own product-specific field efficacy studies.
*Bora-Care remains for the life of the treated wood, so no retreatments are necessary (provided wood is not exposed to rain, continuous water, or in contact with the ground).
Listing and template services provided by inkFrog