Precision Micro-registration Screen Printing Clamp Print Tool New

Description

Precision  Micro-registration Screen Printing Clamp
Application:
This item is a  three-directions micro adjustable screen printing head; It can  be adjusted through the knob up and down  in 6.7 inch ,  forward and back within 1 inch, left and right in  1 inch.
Character:
With the screws under the balance frame,  the lifting angle and height of the screen frame can be adjusted  as required.
This machine is equipped with 2 gravity  balance plates, which can be installed individually or together  according to the request. The gravity balance plate can move  forward and backward in 4 inch.
Micro adjustment operation
:
Height adjustment:
Place  the screen frame flat on the platform. According to the  substrate height or printing requirements, rotate the handle up  & down to reach an appropriate height, then lock the height with  the two rear positioning handles.
Left and right adjustment:
loosen  the handle on both sides of the press, and rotate the handle to  move slightly left and right as required, after adjustment  tighten both handles.
Back and forward adjustment:
First, slightly loosen that four red knobs overhead the  clamp, then loosen the metal knobs on both sides of the clamp  and move front and rear as required. After adjusting, tighten  the metal knobs and four red knobs on the top.
Product  Parameter:
Clamp size: 11"  x 3" (width x height)
Suggest max screen frame size: 13" x17"  x 2"
Packing: wooden case
Item include:
1 Set of Precision Micro-registration Screen  Printing Clamp---006580
On Oct-13-19 at 12:36:17 PDT, seller added the following information: