TECHTONGDA 20x24 Inch Vacuum Silk Screen Printing Press Micro-Registration New

Description

006156（S4050 006156S5060 Three  Directions Micro Adjust Vacuum Screen Printing Table
3 Directions  Micro-adjustable Vacuum Screen Printer---20" x 24"
Application:
This is screen printer  with vacuum pallet, suitable for all kinds of high precision and  exquisite plane screen printing, especially for light and thin  materials like paper, plastic sheet, CD, credit card, PCB, and  all kinds of film, card, board and paper.
Also suitable for all kinds of transfer paper, PVC, PET, PC and  other soft/ hard film, board, paper, nameplate, and similar  materials.
It can also be used for the fine printing on heavy and thick  products, such as paper boxes, glass, wood boards, metal plates,  signage, various plastic boards and etc.
Not  suitable for cloth, ribbons, handkerchiefs and other textile  products, textile materials are recommended to use the scraping  pallet with glue.
Character:
1, The  printing object can be tightly adsorbed on the pallet, to  prevent the printing object moved by outside force.
2. After printing, vacuum  pallet can keep the printing object close to the pallet can  won't be lift up by ink.
3.
Equip with 3 gravity balance  plates, they can be installed individually or together according  to weight request, it can be moved forward and back within 4  inches (10cm ).
With the bolt in the balance rack, could  adjust the lifting angle and height of the screen frame.
Function:
This  screen printing table uses 2 mm stainless steel plate laser  cutting, Suction hole diameter is 1 mm; The spacing of air holes is 15  mm. The quantity of air holes are 1044 (29 rows in horizontal  direction and 36 rows in vertical direction).
Three-directions micro adjustable, it can be micro adjusted  through the knob up and down , forward and back 3/4 inch, left  and right 3/4 inch ;
Place  the substrate on the table surface and start the vacuum pump.  Clamp the screen frame after aligning the screen pattern with  the substrate.
Height adjustment:
place the screen frame flat on the  platform. According to the substrate height or printing  requirements, rotate the up and down adjustment handle to reach  the appropriate height, and lock the height through the two rear  positioning handles.
Left  and right adjustment:
loosen the handle on both sides of the  nose, and rotate the handle to move slightly left and right as  required; When it is done, tighten both handles.
Back  and forward adjustment:
first, slightly loosen the four red  knobs on the front of the chuck, then loosen the fine-tuning  knobs on both sides of the front of the chuck and make front and  rear fine-tuning as required. After the fine-tuning, tighten the  knob and tighten the four red knobs on the top of the chuck.
When  substrate area is too small, adsorption will reduce, you can  cover the blowholes around the substrate with plastic sheets or  paper to increase the adsorption of substrate.
Parameter:
Pallet whole area 20x24 inches, Vacuum area is 16.5x20.7 inches  ;
Clamp size: clamp size: 15.5 x 3 inches,  max thickness: 2 inches
Suggest max screen frame size:  20x24x2 inches (50x60x5 cm)
Suggest printing area: 16x20 inches (40x50 cm)
Machine size about: 30x20x16 inches  ( 75x50x40 cm)
Stander height:  about 6 inches
Item include:
1 set 20x24 inch Three Directions  Micro-adjustable Vacuum Screen Printer---006156
On Oct-10-19 at 19:42:31 PDT, seller added the following information: