VIVOSUN 10"x20.75" Seedling Heat Mat and Digital Thermostat Combo Set MET Stand

Description

About Heat Mat
Built to Last
IP67 water resistance means you can scrub the mat clean or wipe up spills without worry.
Energy efficient design: Only uses 18 Watts.
The 10" x 20.75" mat is perfect for a standard 1020 tray
Maintain Temperatures
VIVOSUN's heat-mat technology hits that sweet spot temperature around 10℉-20℉ above ambient air temperature - perfect for seed starting and cutting propagation!
After covering with a humidity dome, the mat gets warm enough to create dew throughout the plastic dome, keeping your plants from drying out.
Keeps a steady temperature and distributes heat evenly, even in the cold (with an insulating layer underneath).
Designed with the Latest Tech
VIVOSUN's upgraded heating film ensures uniform heating and unbeatable durability.
The multi-layer construction gives you complete assurance this heat mat won't overheat or scorch your delicate roots when left on 24 hours a day.
About Thermostat Controller
High-Quality Construction
The easy-to-grip hexagon controller is made of extra-fortified plastic and high-quality components that won’t malfunction under tough conditions.
Clear, minimalist display, detailed finishing, smooth edges, and tactile buttons demonstrate the controller’s superior craftsmanship.
Compatible with standard North American outlets and plugs: the secure-fit 3-prong grounded socket grips plugs tightly.
Electrical specs: 120 Volts/60 HZ/8.3 max Amps/max Wattage 1,000 W.
Install Anywhere
Hang the controller however you want from the eyelet tab: it can hang flush with the wall or from a variety of hook sizes.
The angle of the outlet keeps cords from getting tangled.
The adjustable suction cup lets you easily stick the thermostat probe to a wall or terrarium.
Enjoy more installation flexibility with a 5’10” power cord and 6’5” probe cord.
Warning: Do not immerse digital controller or the thermostat sensor probe in liquid or very wet soil.
Zero-Effort Setup & Operation
The controller comes with a manual, but you won’t need to read it! The 3-button design takes just seconds to operate:
To set a target temperature,
Press “SET” once to display the current target temperature
Hold “SET” for 3 seconds to set a new target temp.
“+” and “-” adjust the target temp.
Press “SET” again to confirm
Hold “+” to show Fahrenheit
Hold “-”to show Celsius